
Explosion-proof infrared gas detection with lifetime factory calibration
Explosion-proof, 316L stainless steel infrared point detector for methane, propane, ethylene, butane, biogas, and CO₂. It is factory calibrated for life with no field calibration, responds in under 1.5 seconds (T90), and is designed for SIL 2 safety systems.
Factory calibrated for life, so there is no field calibration. Built-in condition monitoring runs a continuous health check of all important hardware and software functions and tells the operator when anything needs attention.
The solid-state infrared SafeSource™ gives long-term stability and lifetime, with a 15-year warranty on the source and a 6-year warranty on the detector.
Fast response, with T90 under 1.5 seconds. OptoBAS™ improves signal baseline accuracy, and heated sapphire optics help keep the optical path clear.
Designed for SIL 2/SC3 systems (SIL 3 in 1oo2 redundancy) and rated ATEX/IECEx Ex db eb ib IIC T5 Gb, with marine approvals from MED, BV, LR, DNV GL, and ABS.
4–20 mA source or sink output with HART 7 for configuration and maintenance, plus the OptoCom™ module for application-specific digital protocols and DCS integration.
One detector suits many applications. Accessories include duct flange, gas sampling, and gas test kits, and they are easy to change when needs change.
From the PG11 datasheet (022-80052-ML R04).
0–100% LEL, or 0–100% by volume
0–100% LEL
0–100% by volume (CH₄ in a CO₂ background)
0–10% or 0–25% by volume
Accessories adapt the PG11 to most applications, from duct mounts to extractive cabinets. Contact GDS to specify.
Insect guard with an integrated gas nozzle. You don't need to remove it for routine testing.
For field testing. Separate inlet and outlet let you vent test gas to a safe area.
Snap-in kit for extractive systems. Its small volume keeps the sampling loop fast.
For most standard JIS, ISO, and ANSI flanges.
Function and bump test the detector without test gas. Supplied as a kit of four testers at four levels.
Wired and wireless interfaces and fieldbuses. It can act as a wireless bridge in a mesh network.
Sunshade, universal mount kit, remote gas test kit, cleaning kit, and maintenance blocking kit.
Typical facilities and process areas where this product protects people and assets.
Key parameters below. For full datasheets, ratings, and ordering options, contact GDS.
| Manufacturer | Optronics |
| Category | Infrared Point Gas Detectors |
| Technology | Solid-state infrared SafeSource™, temperature compensated |
| Gases and ranges | Methane 0–100% LEL or 0–100% vol · Propane, ethylene, butane 0–100% LEL · Biogas (CH₄ in CO₂) 0–100% vol · CO₂ 0–10% or 0–25% vol |
| Calibration | Factory calibrated; no field calibration needed |
| Self-test | Continuous health check of all important hardware and software functions |
| Accuracy | ±3% FS |
| Repeatability | ±1% FS |
| Response time | T90 = 1.5 s |
| Signal output | 4–20 mA current source or sink; warnings and faults signalled below 4 mA · HART 7 for maintenance and configuration · OptoCom™ for application-specific digital protocols |
| Operating temperature | −40 to +65 °C (−40 to +149 °F) · Desert version −40 to +75 °C (−40 to +167 °F) · Arctic version −60 to +65 °C (−76 to +149 °F) |
| Storage temperature | −60 to +75 °C (−76 to +167 °F) |
| Humidity | 0–100% RH |
| Vibration | Resistant to shock and vibration up to 4 g |
| Ingress protection | IP66 / IP67 |
| Housing | 316L stainless steel |
| Weight and dimensions | Under 3.5 kg (7.7 lb); 250 × 120 × 120 mm |
| Field wiring | Stranded or solid wire up to 2.5 mm² |
| Cable entries | Two M20 as standard; M25, ½" NPT, and ¾" NPT on request |
| Power | 18–50 V DC; under 3.5 W average (under 5 W, Arctic version); soft boot with 1 A max. current spikes |
| Hazardous area | ATEX/IECEx Ex db eb ib IIC T5 Gb |
| Marine approvals | MED, BV, LR, DNV GL, ABS |
| Safety integrity | SIL 2/SC3 to IEC 61508 (SIL 3 in 1oo2 redundancy) |
| Warranty | 6 years; 15 years on the SafeSource™ |
| Approvals | ATEX, IECEx, SIL 2, MED, DNV |
Tell us the details and we'll come back with pricing, availability, and lead time — usually the same day.
Others in the Infrared Point Gas Detectors range and from Optronics.
Send us the details and our team will get you a quote and lead time — usually the same day.
Request a Quote